Free pilot — no card required. There are 20 account places. Apply for a place, verify your email, and create your account without manual approval. A place is held only when your invitation is used to create an account. Verification links expire after 24 hours and unused invitations after 7 days; neither reserves a place. When all places are claimed, the pilot is full.

Pilot members receive up to four managed AI provider attempts per UTC day, resetting at midnight UTC. One action may use several attempts; retries, history shortening, failed and cancelled provider attempts count. Existing members and administrators retain their current daily limits.

Managed AI accepts bounded text requests up to 8,000 input tokens and caps output at 2,000 tokens. Conservative size checks can reject shorter requests. Images, PDFs and tool calls are unsupported during the pilot; oversized or unsupported requests are rejected before dispatch.

FluxBench pays for managed AI. Everyone shares a $40 monthly reservation budget, resetting on the first day of each month at midnight UTC. Managed AI pauses when there is insufficient budget for an attempt, even if daily allowance remains. Unconfirmed costs stay reserved. There are no automatic charges or paid upgrades. Personal API keys use separate provider billing and are unaffected by this shared budget.

Cloud compilation, synthesis, simulation and extraction share ten operations per minute and two simultaneous operations per account. Cloud compilation depends on an externally hosted compiler and its availability.

The Windows 10/11 x64 local compiler preview requires the companion, board packages and required libraries, with no AI subscription required. It supports a bounded set of Arduino targets; FPGA synthesis is outside the local preview. The website and account/project services still require internet. Compiler setup and supported targets.

Saved project payloads are limited to 2 MB for files/designs and 400,000 code characters. Unlimited storage is not promised.

FluxBench.AI · reference snapshot reviewed September 23, 2026

What works on each board

Compilation, simulation and uploading are different capabilities. The counts and board matrix below preserve the September 23 reference review; current Lab guidance follows separately. Each result covers exact circuits and sketches.

3

board profiles reviewed

12

reproducible reference cases

9

recorded reference builds

Pending

physical board validation

Board-support matrix · September 23 snapshot

ESP32 DevKit (WROOM-32)

Classic 30-pin reference; other ESP32 variants need their own checks.

Cloud compile

3/3 reference sketches compiled

Arduino C++; 2026-09-21. A successful build applies to the exact sketch and compiler target.

Build evidence
Interpreter / emulator

Teaching subset verified

Divider, button/LED and PWM reference cases. This board profile uses the teaching interpreter.

Teaching references
Component models

Resistor divider, button and LED, averaged PWM; additional DHT fault and HC-SR04 parking references.

A component appearing in the palette does not establish a validated model.

USB upload

Browser flasher implemented

Espressif .bin via Web Serial. Requires a compatible browser, USB port and bootloader; no new physical upload test.

Physical verification

Not tested

No physical verification is recorded for these exact references. Upload, reboot, serial and circuit observations remain pending.

Arduino Uno R3

ATmega328P profile; does not cover Uno R4.

Cloud compile

3/3 reference sketches compiled

Arduino C++; 2026-09-21. A successful build applies to the exact sketch and compiler target.

Build evidence
Interpreter / emulator

Teaching + experimental compiled Uno

The September 23 review verified twenty fixed compiled cases with circuit inputs, 5 V GPIO, 10-bit ADC and bounded bus models. Current limits are in the linked guides. Teaching remains the default.

Teaching references

September review evidence · Current compiled Uno limits · Current OLED example

Component models

Teaching divider/button/PWM references; experimental compiled circuits with resistors, LEDs, buttons, pots, switches, bounded 74HC165 and ADXL345 models. See the twenty-case limits.

A component appearing in the palette does not establish a validated model.

USB upload

External upload required

The compiler returns AVR firmware. FluxBench has no built-in AVR USB uploader; use an external tool appropriate for the board.

Physical verification

Not tested

No physical verification is recorded for these exact references. Upload, reboot, serial and circuit observations remain pending.

Raspberry Pi Pico

Original RP2040 profile; does not cover Pico W, Pico 2 or Pico 2 W.

Cloud compile

3/3 reference sketches compiled

Arduino C++; 2026-09-21. A successful build applies to the exact sketch and compiler target.

Build evidence
Interpreter / emulator

Teaching + experimental compiled Pico

Opt-in captures up to 500 ms: 3.3 V GPIO, 12-bit ADC, PWM edges and Serial1 output. Twenty-two positive wired cases plus runtime refusal checks. Teaching remains the default.

Teaching references

Compiled Pico setup and limits

Component models

Teaching divider/button/PWM references; bounded compiled resistor, LED, button, pot, ADXL345 tilt, MCP3008 ADC and SSD1306 memory models. One ADXL345/SSD1306 pair is qualified. HC-SR04 uses a separate divider profile. Timed inputs, jumper faults and capture probes are supported within each profile; other combinations and USB Serial remain unsupported.

A component appearing in the palette does not establish a validated model.

USB upload

External upload required

The compiler returns Pico firmware, including UF2. Transfer through the board’s BOOTSEL workflow; FluxBench does not perform that transfer.

Physical verification

Not tested

No physical verification is recorded for these exact references. Upload, reboot, serial and circuit observations remain pending.

Repeatable reference cases · September 23 snapshot

Each case has a fixed circuit, sketch, expected result and declared limits. An intentional failure is a successful test when the expected fault is detected. The parking and crowded-circuit references preserve the existing workflows.

Reproduce the cases and review the evidence

ESP32 DevKit (WROOM-32)

Equal resistor divider

1.65 V ±0.01 V at the midpoint; 0 V ±0.01 V with supply disconnected; isolated hole is floating.

DC resistor model. Uses the 3V3 supply on every board; no ADC or physical tolerance claim.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: esp32-divider
Definition SHA-256: 82d517dbfed091ed162535854c19a053348cfb7c2460364dcb75e4f07bf8dc61

ESP32 DevKit (WROOM-32)

Button → LED

Input GPIO 23, output GPIO 18: LOW at 100 ms, HIGH at 300 ms, LOW at 500 ms; serial 1 at 300 ms. LED current >1 mA on, <0.01 mA off.

Modeled pullup and 3.3 V GPIO drive on all boards, including Uno. No debounce, MCU instruction timing or USB verification.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: esp32-button
Definition SHA-256: 593ae2bd18b97226c9cbb74450861123d7ddd3721ee9889158569121399c5616

ESP32 DevKit (WROOM-32)

PWM duty steps

At 50/150/250 ms: duty 0, 128/255, 1; modeled voltage 0, 1.65647, 3.3 V (±0.01 V). Transitions at 100 and 200 ms.

Duty-averaged voltage, not PWM carrier pulses. Uno output is also modeled at 3.3 V; real board voltage, timers and PWM frequency are not certified.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: esp32-pwm
Definition SHA-256: 26ab6cf8d5a71d81412b5484ce33bb5dfc7c752ec87561b134e747ccc42607a2

Arduino Uno R3

Equal resistor divider

1.65 V ±0.01 V at the midpoint; 0 V ±0.01 V with supply disconnected; isolated hole is floating.

DC resistor model. Uses the 3V3 supply on every board; no ADC or physical tolerance claim.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: uno-divider
Definition SHA-256: ec030f32875c01406cd9218074557814e7855336a546966d1322610ed867b38c

Arduino Uno R3

Button → LED

Input GPIO 2, output GPIO 9: LOW at 100 ms, HIGH at 300 ms, LOW at 500 ms; serial 1 at 300 ms. LED current >1 mA on, <0.01 mA off.

Modeled pullup and 3.3 V GPIO drive on all boards, including Uno. No debounce, MCU instruction timing or USB verification.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: uno-button
Definition SHA-256: 65970b4e668f15785400f7403f827fdd798efa197922aaee6268765552853b30

Arduino Uno R3

PWM duty steps

At 50/150/250 ms: duty 0, 128/255, 1; modeled voltage 0, 1.65647, 3.3 V (±0.01 V). Transitions at 100 and 200 ms.

Duty-averaged voltage, not PWM carrier pulses. Uno output is also modeled at 3.3 V; real board voltage, timers and PWM frequency are not certified.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: uno-pwm
Definition SHA-256: 51da033bd5446d588c40b87fb85cab2054acd25ebedf342aa15e536072b9dd9b

Raspberry Pi Pico

Equal resistor divider

1.65 V ±0.01 V at the midpoint; 0 V ±0.01 V with supply disconnected; isolated hole is floating.

DC resistor model. Uses the 3V3 supply on every board; no ADC or physical tolerance claim.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: pico-divider
Definition SHA-256: c3ddee994f223d245c45d6442a4d5e452e5c75594620763b2014e4e38f4a03a6

Raspberry Pi Pico

Button → LED

Input GPIO 2, output GPIO 15: LOW at 100 ms, HIGH at 300 ms, LOW at 500 ms; serial 1 at 300 ms. LED current >1 mA on, <0.01 mA off.

Modeled pullup and 3.3 V GPIO drive on all boards, including Uno. No debounce, MCU instruction timing or USB verification.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: pico-button
Definition SHA-256: 4cf56cb0f6bbed86903d330f20335085ee417173b82c6a0752fe1545b8bedff9

Raspberry Pi Pico

PWM duty steps

At 50/150/250 ms: duty 0, 128/255, 1; modeled voltage 0, 1.65647, 3.3 V (±0.01 V). Transitions at 100 and 200 ms.

Duty-averaged voltage, not PWM carrier pulses. Uno output is also modeled at 3.3 V; real board voltage, timers and PWM frequency are not certified.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: pico-pwm
Definition SHA-256: b796ac2fca87baa48bde4a097261ca4c6edf6bd8ae343dfb91cdee1d5d01a766

ESP32 DevKit (WROOM-32)

DHT power fault and recovery

Intentional FAIL at 300 ms: LOW/NaN/floating VCC; HIGH at 500 ms after restoration. Source circuit stays unchanged.

Teaching sensor connectivity and response logic; no DHT bus timing or physical sensor validation.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: esp32-dht-fault
Definition SHA-256: ff8e59f8e1c6d7dbc40b50494ab697d7a59fc9e9cb3136c0e6e506d92def1934

ESP32 DevKit (WROOM-32)

Guided parking sensor v1

63 existing checks: 130/100/70/40/25/15/10 cm zones, wired LEDs, sound, missing-echo fault and recovery.

Scripted distance and DC connectivity; acoustic timeout behavior and physical build remain unverified.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: esp32-parking
Definition SHA-256: f18a0b455311806abf0149b523cc7abd0645f7032151f79fa00bc92a305471d9

ESP32 DevKit (WROOM-32)

Crowded active Lab

Preserve the 40-part/56-wire document, named connections and recovery workflow. Prior local ten-minute rendering result is recorded separately.

A shared GPIO workload, not independent MCUs. No new two-hour or cross-GPU performance result.

Evidence and exact reference

Circuit and sketch · Verification suite

Case: esp32-crowded
Definition SHA-256: b9a360e2dbb0523084ca0e9090490ece7a9902c9f97bc30b0497ea1645ace770

Recorded compilation · September 23 snapshot

Builds recorded for the pinned reference review on the existing HTTPS compiler. No board was flashed. Build duration is an observation, not a performance promise.

ESP32 DevKit (WROOM-32) · 3 builds

esp32-divider

esp32:esp32:esp32

7.50 s · firmware.ino.bin, firmware.ino.bootloader.bin, firmware.ino.merged.bin, firmware.ino.partitions.bin

esp32-button

esp32:esp32:esp32

7.57 s · firmware.ino.bin, firmware.ino.bootloader.bin, firmware.ino.merged.bin, firmware.ino.partitions.bin

esp32-pwm

esp32:esp32:esp32

7.87 s · firmware.ino.bin, firmware.ino.bootloader.bin, firmware.ino.merged.bin, firmware.ino.partitions.bin

Dates, source and artifact hashes

Arduino Uno R3 · 3 builds

uno-divider

arduino:avr:uno

1.80 s · firmware.ino.hex, firmware.ino.with_bootloader.bin, firmware.ino.with_bootloader.hex

uno-button

arduino:avr:uno

2.01 s · firmware.ino.hex, firmware.ino.with_bootloader.bin, firmware.ino.with_bootloader.hex

uno-pwm

arduino:avr:uno

1.90 s · firmware.ino.hex, firmware.ino.with_bootloader.bin, firmware.ino.with_bootloader.hex

Dates, source and artifact hashes

Raspberry Pi Pico · 3 builds

pico-divider

rp2040:rp2040:rpipico

5.08 s · firmware.ino.bin, firmware.ino.uf2

pico-button

rp2040:rp2040:rpipico

3.25 s · firmware.ino.bin, firmware.ino.uf2

pico-pwm

rp2040:rp2040:rpipico

3.36 s · firmware.ino.bin, firmware.ino.uf2

Dates, source and artifact hashes

FluxBench.AI board support and Lab references