FluxBench.AI
How FluxBench compares
A browser workbench for firmware, circuits and hardware design. See what works today, where specialist tools set the benchmark, and what we plan to improve next.
Selected benchmarks by workflow, based on official vendor documentation and FluxBench source and recorded tests. These are our comparison choices, not an independent market ranking. No head-to-head usability or accuracy study has been completed. Targets are planned work, not shipped capabilities.
Board support and reproducible Lab referencesLab first
CRUMB for 3D interaction; Wokwi for firmware execution and test automation.
A guided software path
Cirkit Designer for browser onboarding; separate simulation, compilation and physical test results.
Software work first
Physical controllers and all PCB work are deferred until the remaining software roadmap is exhausted.
| Category | Benchmark and documented strength | FluxBench today | Target - planned |
|---|---|---|---|
| 3D breadboardL1 - software delivered; comparisons pending | CRUMB 3D circuit construction, an 830-point breadboard, interactive parts and pin labels. Desktop and mobile versions have different feature sets. Sources: 1 | Shared 2D/3D editing, live controls and displays, whole-net tracing, named-terminal wiring, Undo and project recovery are implemented. A two-hour local session with 40 parts and 56 wires passed its declared stability checks. That graphics/stability result covers one browser/GPU setup. Additional devices and comparative usability remain unmeasured. | Complete the same build, trace, edit and recovery tasks at least 20% faster than CRUMB, without more wiring errors; retain browser access. |
| Lab measurementsL1 - bounded software checks delivered | CRUMB + Wokwi CRUMB documents voltage/current views and oscilloscopes. Wokwi documents a digital logic analyzer and automated pin/serial assertions. | Shared 2D/3D probes, simulation-time GPIO/serial capture, timestamped CSV, triggers, cursors and saved input/fault scenarios are implemented. Failed checks link captured observations to circuit locations. Compiled Uno adds timed ADXL345 X/Y orientations, eight new firmware cases and backend-aware scenario editing. Teaching scenarios use an approximate Arduino subset with duty-averaged PWM. Separate compiled Uno captures and the analog SPICE bench have their own declared limits. Diagnostic hints do not establish code causality. Evidence and scope
| Broaden independently validated sensor/device scenarios and measure the published reference tasks against CRUMB/Wokwi. |
| Firmware simulationL2 - Uno and bounded Pico captures; broader scope open | Wokwi Supported MCU firmware across AVR, ARM, RISC-V and Xtensa, with CI execution. Automation scenarios are labeled alpha. | Opt-in compiled Uno and original-Pico captures connect firmware to circuit inputs, checks and shared 2D/3D probes. Pico includes a 38-case ADXL345 gate, an 89-case MCP3008 gate, a 123-case sensor/display pair gate, 204 display-history cases and 59 ultrasonic parking cases and 47 prepowered DHT22 cases. Counts include positive and expected-refusal cases. Thirteen saved examples cover timing, inputs and fault recovery. OLED memory and ultrasonic pulses follow the capture cursor; missing display bytes remain unknown. DHT scenarios distinguish changed inputs, faults and cached driver reads. Teaching stays the default. Uno requests up to five seconds; Pico up to 500 ms at 125 MHz with fixed budgets and independent host services, without vendor ROM. The only qualified sensor/display combination is ADXL345 plus SSD1306. Stock Adafruit graphics use a separate memory profile with unmodeled initialization; HC-SR04 uses a separate ideal pulse/divider profile. DHT22 uses a separate prepowered profile with pinned library and ideal DC wiring. Cold startup, physical sensor accuracy, acoustic accuracy, full OLED power-up/optical behavior, other device combinations, PIO, multicore and USB Serial remain unqualified. ESP32 has no accepted compiled backend. Evidence and scope
| Qualify useful sensor/display combinations and additional named device/library cases. Broader MCU coverage and independent Wokwi task comparisons remain open. |
| Guided browser workflowL3 - software delivered; participant pilot pending | Cirkit Designer AI wiring/code, Arduino/ESP32/Pico simulation, custom components and browser upload are documented in one workflow. Sources: 5 | The parking software guide has six repeatable checks with 43 GPIO/serial expectations, sensor-loss recovery and a compile/save/reopen finish. It can be completed without a physical controller. Beginner and competitor timing studies remain pending. The displayed 15 minutes is an estimate; the tilt guide waits for the parking participant gate. Evidence and scope | Four of five newcomers complete the parking simulation unaided within 15 minutes; median task time at least 20% below Cirkit with no higher error rate. |
| Compile and USB uploadH1 - physical work deferred | Arduino Cloud + Cirkit Arduino Cloud uses its installed Agent for USB upload. Cirkit documents browser upload for supported Arduino, ESP32 and Pico boards. | Cloud compilation is separately verified across sixteen core configurations. The Windows local compiler preview has four pinned board packages and eleven build cases, explicit Cloud / This computer selection, installed-version checks and stalled-request recovery. ESP32 Web Serial flashing, a serial monitor/plotter and board-specific guides exist. Local failures never automatically submit to cloud. Public HTTPS-to-loopback, fresh-user installation, signing and non-Windows packaging remain acceptance gates. Compile, simulate and upload coverage differ; new physical ESP32/Uno/Pico validation is deferred. Evidence and scope | Keep compile, simulation and upload evidence separate. Resume physical upload/reboot/serial checks after the remaining software roadmap and owner resumption. |
| Analog and mixed simulationA1 - bounded analog and mixed-reference software delivered | KiCad/ngspice + Proteus KiCad offers ngspice analysis; Proteus co-simulates supported MCU code with mixed-mode circuits. EasyEDA Pro 3.2+ has circuit simulation, excluding MCU code co-simulation. | An independent ngspice 47 bench provides DC/transient/AC analysis, twenty-one checked examples including ideal RL/RLC, seven frequency references and six DC characteristic sweeps, signed currents, complex gain/phase, frequency cursors and SPICE/CSV files. Ten R/C breadboard snapshots and twenty AC/DC sweep variants preserve connectivity, show their test stimulus and detect stale wiring. A separate qualified Uno/RC example adds a 250 µs source-bound capture with compiled firmware and native analog input crossings. The mixed example accepts one exact sketch and a 10 kΩ / 1 nF INT1 circuit with behavioral thresholds. Other mixed circuits, silicon accuracy and manufacturer models are unqualified. The investigated LM358 macro was rejected; generic netlists are not manufacturer validation. Evidence and scope
| Preserve the qualified numerical/timing subsets, qualify newly selected models with independent tests, and measure equivalent KiCad/Proteus tasks before claiming an advantage. |
| Schematic and PCBP1 - all PCB work deferred | KiCad + EasyEDA + Flux Established schematic/layout/export workflows; Flux documents AI placement/routing and live sourcing. Feature coverage varies by product and edition. | ERC/DRC, layout/routing, fabrication exports and part-specific checks exist. A five-board ESP32 prototype review package is prepared. All PCB work is deferred until the remaining software roadmap is exhausted and the owner resumes it. No supplier submission, quote or prototype order is recorded. Evidence and scope | After resumption, resolve supplier review, separately approve prototypes and validate the resulting hardware before production claims. |
| AI and reusable partsAI1 - bounded software gates delivered | Flux + Cirkit Designer Flux documents AI design reviews, datasheet work and live parts data. Cirkit documents custom visuals, pin definitions and AI-generated simulation behavior. | The fixed twenty-task evaluation passed 20/20 after a 19/20 baseline. Eight sketches compiled and passed runtime checks; wiring/editor changes support guarded recovery. Ten reusable records preserve 25 pins and 300 connectivity pairs through native round trips. A live owner-account check also preserved ten synthetic records through cloud import, reload and exact export, followed by cleanup. Individual companion pairing is software-verified. These are bounded tests, not manufacturer-model qualification or a competitor win. The cloud check started with an empty library, so it does not establish legacy-data recovery. Another-user companion acceptance, complete cost reconciliation and comparative measurements remain pending. | Verify independent companion acceptance, then run equivalent fixed tasks against Flux/Cirkit with model, attempts, time and cost recorded. |
| FPGA and HDLF1 - ten software references delivered | EDA Playground Verilog/SystemVerilog, VHDL and multiple simulators/synthesis tools. Some commercial tools require validated access. Sources: 13 | A published tool matrix and ten HDL designs pass 40 testbench assertions, 40 waveform samples, repeat agreement, ten injected faults and synthesis. The viewer preserves 64-bit values and exposes a capture-time cursor. This is a bounded Verilog-oriented Icarus/Yosys subset. VHDL, UVM, full SystemVerilog and commercial simulator parity are not established. Physical FPGA validation remains deferred. Evidence and scope | Measure the tested waveform/debugging tasks against EDA Playground. Add language/tool breadth only for a real project and a reviewed compatibility gate. |
3D breadboard
L1 - software delivered; comparisons pending
CRUMB
3D circuit construction, an 830-point breadboard, interactive parts and pin labels. Desktop and mobile versions have different feature sets.
Sources: 1
FluxBench today
Shared 2D/3D editing, live controls and displays, whole-net tracing, named-terminal wiring, Undo and project recovery are implemented. A two-hour local session with 40 parts and 56 wires passed its declared stability checks.
That graphics/stability result covers one browser/GPU setup. Additional devices and comparative usability remain unmeasured.
Target - planned
Complete the same build, trace, edit and recovery tasks at least 20% faster than CRUMB, without more wiring errors; retain browser access.
Lab measurements
L1 - bounded software checks delivered
CRUMB + Wokwi
CRUMB documents voltage/current views and oscilloscopes. Wokwi documents a digital logic analyzer and automated pin/serial assertions.
FluxBench today
Shared 2D/3D probes, simulation-time GPIO/serial capture, timestamped CSV, triggers, cursors and saved input/fault scenarios are implemented. Failed checks link captured observations to circuit locations. Compiled Uno adds timed ADXL345 X/Y orientations, eight new firmware cases and backend-aware scenario editing.
Teaching scenarios use an approximate Arduino subset with duty-averaged PWM. Separate compiled Uno captures and the analog SPICE bench have their own declared limits. Diagnostic hints do not establish code causality.
Evidence and scope
- Reference cases and board-support matrix
- Lab measurement and fault-check verification
- Timed sensor scenarios and firmware assertions
- Guided diagnosis and read-only 3D inspection
- Bounded ADXL345 model validation
- Compiled capture diagnosis and examples
- Timed ADXL345 orientation scenarios
- Compiled Pico ADXL345 scenarios, transfers and 38-case qualification
- MCP3008 Pico Lab: 89 captures, held DC inputs and two saved scenarios
- Pico OLED memory: 140 captures, unknown-state preservation and bus recovery
Target - planned
Broaden independently validated sensor/device scenarios and measure the published reference tasks against CRUMB/Wokwi.
Firmware simulation
L2 - Uno and bounded Pico captures; broader scope open
Wokwi
Supported MCU firmware across AVR, ARM, RISC-V and Xtensa, with CI execution. Automation scenarios are labeled alpha.
FluxBench today
Opt-in compiled Uno and original-Pico captures connect firmware to circuit inputs, checks and shared 2D/3D probes. Pico includes a 38-case ADXL345 gate, an 89-case MCP3008 gate, a 123-case sensor/display pair gate, 204 display-history cases and 59 ultrasonic parking cases and 47 prepowered DHT22 cases. Counts include positive and expected-refusal cases. Thirteen saved examples cover timing, inputs and fault recovery. OLED memory and ultrasonic pulses follow the capture cursor; missing display bytes remain unknown. DHT scenarios distinguish changed inputs, faults and cached driver reads.
Teaching stays the default. Uno requests up to five seconds; Pico up to 500 ms at 125 MHz with fixed budgets and independent host services, without vendor ROM. The only qualified sensor/display combination is ADXL345 plus SSD1306. Stock Adafruit graphics use a separate memory profile with unmodeled initialization; HC-SR04 uses a separate ideal pulse/divider profile. DHT22 uses a separate prepowered profile with pinned library and ideal DC wiring. Cold startup, physical sensor accuracy, acoustic accuracy, full OLED power-up/optical behavior, other device combinations, PIO, multicore and USB Serial remain unqualified. ESP32 has no accepted compiled backend.
Evidence and scope
- Five-second compiled Uno capture gate
- Compiled Uno Lab integration and twenty-case evidence
- Compiled capture diagnosis and examples
- Classic ESP32 backend decision
- RP2040 boot probe and distribution boundary
- Independent RP2040 boot-service study and integration limits
- Pico clock/core and source-to-firmware compiler binding
- Guarded Pico captures, scenarios and shared 2D/3D probes
- Thirteen compiled Pico examples and deadline-bounded diagnosis
- Compiled Pico ADXL345 scenarios, transfers and 38-case qualification
- MCP3008 Pico Lab: 89 captures, held DC inputs and two saved scenarios
- Pico OLED memory: 140 captures, unknown-state preservation and bus recovery
- Pico shared ADXL345/SSD1306 bus: 123 public capture cases
- Pico OLED histories: 204 cases and saved pixel expectations
- Pico ultrasonic parking: 59 cases, saved scenarios and probes
- Pico DHT22 capture, cached reads and faults
Target - planned
Qualify useful sensor/display combinations and additional named device/library cases. Broader MCU coverage and independent Wokwi task comparisons remain open.
Guided browser workflow
L3 - software delivered; participant pilot pending
Cirkit Designer
AI wiring/code, Arduino/ESP32/Pico simulation, custom components and browser upload are documented in one workflow.
Sources: 5
FluxBench today
The parking software guide has six repeatable checks with 43 GPIO/serial expectations, sensor-loss recovery and a compile/save/reopen finish. It can be completed without a physical controller.
Beginner and competitor timing studies remain pending. The displayed 15 minutes is an estimate; the tilt guide waits for the parking participant gate.
Evidence and scope
Target - planned
Four of five newcomers complete the parking simulation unaided within 15 minutes; median task time at least 20% below Cirkit with no higher error rate.
Compile and USB upload
H1 - physical work deferred
Arduino Cloud + Cirkit
Arduino Cloud uses its installed Agent for USB upload. Cirkit documents browser upload for supported Arduino, ESP32 and Pico boards.
FluxBench today
Cloud compilation is separately verified across sixteen core configurations. The Windows local compiler preview has four pinned board packages and eleven build cases, explicit Cloud / This computer selection, installed-version checks and stalled-request recovery. ESP32 Web Serial flashing, a serial monitor/plotter and board-specific guides exist.
Local failures never automatically submit to cloud. Public HTTPS-to-loopback, fresh-user installation, signing and non-Windows packaging remain acceptance gates. Compile, simulate and upload coverage differ; new physical ESP32/Uno/Pico validation is deferred.
Evidence and scope
Target - planned
Keep compile, simulation and upload evidence separate. Resume physical upload/reboot/serial checks after the remaining software roadmap and owner resumption.
Analog and mixed simulation
A1 - bounded analog and mixed-reference software delivered
KiCad/ngspice + Proteus
KiCad offers ngspice analysis; Proteus co-simulates supported MCU code with mixed-mode circuits. EasyEDA Pro 3.2+ has circuit simulation, excluding MCU code co-simulation.
FluxBench today
An independent ngspice 47 bench provides DC/transient/AC analysis, twenty-one checked examples including ideal RL/RLC, seven frequency references and six DC characteristic sweeps, signed currents, complex gain/phase, frequency cursors and SPICE/CSV files. Ten R/C breadboard snapshots and twenty AC/DC sweep variants preserve connectivity, show their test stimulus and detect stale wiring. A separate qualified Uno/RC example adds a 250 µs source-bound capture with compiled firmware and native analog input crossings.
The mixed example accepts one exact sketch and a 10 kΩ / 1 nF INT1 circuit with behavioral thresholds. Other mixed circuits, silicon accuracy and manufacturer models are unqualified. The investigated LM358 macro was rejected; generic netlists are not manufacturer validation.
Evidence and scope
- Five ngspice reference circuits
- Three ideal inductor references and fault checks
- Seven AC frequency references and fault checks
- Six DC characteristic sweeps and fault checks
- Breadboard snapshots and ten numerical fixtures
- Breadboard AC/DC sweeps and twenty numerical variants
- Source-bound Uno/RC capture and native lifecycle
Target - planned
Preserve the qualified numerical/timing subsets, qualify newly selected models with independent tests, and measure equivalent KiCad/Proteus tasks before claiming an advantage.
Schematic and PCB
P1 - all PCB work deferred
KiCad + EasyEDA + Flux
Established schematic/layout/export workflows; Flux documents AI placement/routing and live sourcing. Feature coverage varies by product and edition.
FluxBench today
ERC/DRC, layout/routing, fabrication exports and part-specific checks exist. A five-board ESP32 prototype review package is prepared.
All PCB work is deferred until the remaining software roadmap is exhausted and the owner resumes it. No supplier submission, quote or prototype order is recorded.
Evidence and scope
Target - planned
After resumption, resolve supplier review, separately approve prototypes and validate the resulting hardware before production claims.
AI and reusable parts
AI1 - bounded software gates delivered
Flux + Cirkit Designer
Flux documents AI design reviews, datasheet work and live parts data. Cirkit documents custom visuals, pin definitions and AI-generated simulation behavior.
FluxBench today
The fixed twenty-task evaluation passed 20/20 after a 19/20 baseline. Eight sketches compiled and passed runtime checks; wiring/editor changes support guarded recovery. Ten reusable records preserve 25 pins and 300 connectivity pairs through native round trips. A live owner-account check also preserved ten synthetic records through cloud import, reload and exact export, followed by cleanup. Individual companion pairing is software-verified.
These are bounded tests, not manufacturer-model qualification or a competitor win. The cloud check started with an empty library, so it does not establish legacy-data recovery. Another-user companion acceptance, complete cost reconciliation and comparative measurements remain pending.
Target - planned
Verify independent companion acceptance, then run equivalent fixed tasks against Flux/Cirkit with model, attempts, time and cost recorded.
FPGA and HDL
F1 - ten software references delivered
EDA Playground
Verilog/SystemVerilog, VHDL and multiple simulators/synthesis tools. Some commercial tools require validated access.
Sources: 13
FluxBench today
A published tool matrix and ten HDL designs pass 40 testbench assertions, 40 waveform samples, repeat agreement, ten injected faults and synthesis. The viewer preserves 64-bit values and exposes a capture-time cursor.
This is a bounded Verilog-oriented Icarus/Yosys subset. VHDL, UVM, full SystemVerilog and commercial simulator parity are not established. Physical FPGA validation remains deferred.
Evidence and scope
Target - planned
Measure the tested waveform/debugging tasks against EDA Playground. Add language/tool breadth only for a real project and a reviewed compatibility gate.
Sources and scope
Vendor sources were reviewed on September 20, 2026; FluxBench software evidence was updated on September 23, 2026 and is pinned to the reviewed version. Documented features are not proof of equal accuracy, performance or ease of use. Board, edition and platform restrictions apply. Personal Codex requires the owner's desktop companion; USB flashing requires a compatible browser and board.
Public guides: analog Lab and examples · HDL tools and waveforms. Detailed repository evidence requires repository access.
- CRUMB: released features by version
- Wokwi: supported hardware
- Wokwi: CI and GitHub Actions
- Wokwi: automation scenarios (alpha)
- Cirkit Designer: workflow and custom parts
- Arduino: official Cloud Agent repository
- KiCad: ngspice simulation
- Proteus: VSM simulation
- EasyEDA Pro: simulation scope
- KiCad: product scope
- EasyEDA: edition features
- Flux: AI, PCB and manufacturing workflow
- EDA Playground: languages and tools